config BR2_TARGET_OPENSBI
	bool "opensbi"
	depends on BR2_riscv
	help
	  OpenSBI aims to provide an open-source and extensible
	  implementation of the RISC-V SBI specification for a platform
	  specific firmware (M-mode) and a general purpose OS,
	  hypervisor or bootloader (S-mode or HS-mode). OpenSBI
	  implementation can be easily extended by RISC-V platform or
	  System-on-Chip vendors to fit a particular hadware
	  configuration.

	  https://github.com/riscv/opensbi.git

if BR2_TARGET_OPENSBI
choice
	prompt "OpenSBI Version"
	help
	  Select the specific OpenSBI version you want to use

config BR2_TARGET_OPENSBI_LATEST_VERSION
	bool "0.9"

config BR2_TARGET_OPENSBI_CUSTOM_VERSION
	bool "Custom version"
	help
	  This option allows to use a specific official versions

config BR2_TARGET_OPENSBI_CUSTOM_TARBALL
	bool "Custom tarball"

config BR2_TARGET_OPENSBI_CUSTOM_GIT
	bool "Custom Git repository"

endchoice

config BR2_TARGET_OPENSBI_CUSTOM_VERSION_VALUE
	string "OpenSBI version"
	depends on BR2_TARGET_OPENSBI_CUSTOM_VERSION

config BR2_TARGET_OPENSBI_CUSTOM_TARBALL_LOCATION
	string "URL of custom OpenSBI tarball"
	depends on BR2_TARGET_OPENSBI_CUSTOM_TARBALL

if BR2_TARGET_OPENSBI_CUSTOM_GIT

config BR2_TARGET_OPENSBI_CUSTOM_REPO_URL
	string "URL of custom repository"

config BR2_TARGET_OPENSBI_CUSTOM_REPO_VERSION
	string "Custom repository version"
	help
	  Revision to use in the typical format used by Git. E.G. a
	  sha id, a tag, branch, ..

endif

config BR2_TARGET_OPENSBI_VERSION
	string
	default "0.9"	if BR2_TARGET_OPENSBI_LATEST_VERSION
	default BR2_TARGET_OPENSBI_CUSTOM_VERSION_VALUE \
		if BR2_TARGET_OPENSBI_CUSTOM_VERSION
	default "custom"	if BR2_TARGET_OPENSBI_CUSTOM_TARBALL
	default BR2_TARGET_OPENSBI_CUSTOM_REPO_VERSION \
		if BR2_TARGET_OPENSBI_CUSTOM_GIT

config BR2_TARGET_OPENSBI_PLAT
	string "OpenSBI Platform"
	default ""
	help
	  Specifies the OpenSBI platform to build. If no platform is
	  specified only the OpenSBI platform independent static
	  library libsbi.a is built. If a platform is specified then
	  the platform specific static library libplatsbi.a and firmware
	  examples are built.

config BR2_TARGET_OPENSBI_INSTALL_DYNAMIC_IMG
	bool "Install fw_dynamic image"
	default y if BR2_TARGET_OPENSBI_PLAT != ""
	help
	  This installs the fw_dynamic image.

config BR2_TARGET_OPENSBI_INSTALL_JUMP_IMG
	bool "Install fw_jump image"
	default y if BR2_TARGET_OPENSBI_PLAT != ""
	help
	  This installs the fw_jump image.

config BR2_TARGET_OPENSBI_INSTALL_PAYLOAD_IMG
	bool "Install fw_payload image"
	help
	  This option enables the installation of the fw_paylaod
	  image.

config BR2_TARGET_OPENSBI_LINUX_PAYLOAD
	bool "Include Linux as OpenSBI Payload"
	depends on BR2_TARGET_OPENSBI_PLAT != ""
	depends on BR2_LINUX_KERNEL
	depends on BR2_LINUX_KERNEL_IMAGE
	select BR2_TARGET_OPENSBI_INSTALL_PAYLOAD_IMG
	help
	  Build OpenSBI with the Linux kernel as a Payload.

config BR2_TARGET_OPENSBI_UBOOT_PAYLOAD
	bool "Include U-Boot as OpenSBI Payload"
	depends on BR2_TARGET_OPENSBI_PLAT != ""
	depends on BR2_TARGET_UBOOT
	select BR2_TARGET_OPENSBI_INSTALL_PAYLOAD_IMG
	help
	  Build OpenSBI with the U-Boot as a Payload.

config BR2_TARGET_OPENSBI_FW_FDT_PATH
	bool "Include U-Boot DTB in OpenSBI Payload"
	depends on BR2_TARGET_OPENSBI_UBOOT_PAYLOAD
	select BR2_TARGET_UBOOT_FORMAT_DTB
	help
	  Build OpenSBI with FW_FDT_PATH set to
	  $(BINARIES_DIR)/u-boot.dtb. Note that CONFIG_OF_SEPARATE
	  must be set in the U-Boot configuration for this file to be
	  produced.

endif
