===TC-GPIOtrigger-1===
{| class="wikitable" style="text-align: left;"
|-
| '''ID:''' || TC-GPIOtrigger-1
| '''Module:''' || GPIOtrigger
| '''Type:''' || F
| '''Version:''' || 0.0.1
|-
| '''Reference ID:''' || 0
| '''Author:''' || Fenghelong 
| '''Created Date:''' || colspan="3" | 2013-07-06 
|-
| '''Description:''' || colspan="7" |新增GPIO调度任务,调度名称为空,保存,提示调度任务名称不能为空 
|-
| '''Pre-conditions:''' || colspan="7" |
# 服务器服务运行正常

|-
| '''Required Data:''' || colspan="7" | 
|-
| '''Run-Instructions:''' 
| colspan="7" | 
|-
| '''Post-conditions:''' || colspan="7" | 
|-
| '''Expectations:''' || colspan="7" |
提示调度任务名称不能为空

|-
| '''Remark:''' || colspan="7" | 
|-
| '''Change History:''' || colspan="7" | 
|}
===TC-GPIOtrigger-2===
{| class="wikitable" style="text-align: left;"
|-
| '''ID:''' || TC-GPIOtrigger-2
| '''Module:''' || GPIOtrigger
| '''Type:''' || F
| '''Version:''' || 0.0.1
|-
| '''Reference ID:''' || 0
| '''Author:''' || Fenghelong 
| '''Created Date:''' || colspan="3" | 2013-07-06 
|-
| '''Description:''' || colspan="7" |新增GPIO调度任务,调度描述为空,新增调度任务成功 
|-
| '''Pre-conditions:''' || colspan="7" |
# 服务器服务运行正常

|-
| '''Required Data:''' || colspan="7" | 
|-
| '''Run-Instructions:''' 
| colspan="7" | 
|-
| '''Post-conditions:''' || colspan="7" | 
|-
| '''Expectations:''' || colspan="7" |
新增调度任务成功

|-
| '''Remark:''' || colspan="7" | 
|-
| '''Change History:''' || colspan="7" | 
|}
===TC-GPIOtrigger-3===
{| class="wikitable" style="text-align: left;"
|-
| '''ID:''' || TC-GPIOtrigger-3
| '''Module:''' || GPIOtrigger
| '''Type:''' || F
| '''Version:''' || 0.0.1
|-
| '''Reference ID:''' || 0
| '''Author:''' || Fenghelong 
| '''Created Date:''' || colspan="3" | 2013-07-06 
|-
| '''Description:''' || colspan="7" |新增GPIO调度任务,搜索未部署的终端,添加到部署列表中,部署成功后,部署终端将会执行此GPIO事件 
|-
| '''Pre-conditions:''' || colspan="7" |
# 服务器服务运行正常

|-
| '''Required Data:''' || colspan="7" | 
|-
| '''Run-Instructions:''' 
| colspan="7" | 
|-
| '''Post-conditions:''' || colspan="7" | 
|-
| '''Expectations:''' || colspan="7" |
部属终端将执行此GPIO事件

|-
| '''Remark:''' || colspan="7" | 
|-
| '''Change History:''' || colspan="7" | 
|}
===TC-GPIOtrigger-4===
{| class="wikitable" style="text-align: left;"
|-
| '''ID:''' || TC-GPIOtrigger-4
| '''Module:''' || GPIOtrigger
| '''Type:''' || F
| '''Version:''' || 0.0.1
|-
| '''Reference ID:''' || 0
| '''Author:''' || Fenghelong 
| '''Created Date:''' || colspan="3" | 2013-07-06 
|-
| '''Description:''' || colspan="7" |新增GPIO调度任务,点击已部署的终端,已部署的终端状态会变为未部署 
|-
| '''Pre-conditions:''' || colspan="7" |
# 服务器服务运行正常

|-
| '''Required Data:''' || colspan="7" | 
|-
| '''Run-Instructions:''' 
| colspan="7" | 
|-
| '''Post-conditions:''' || colspan="7" | 
|-
| '''Expectations:''' || colspan="7" |
已部属的终端变为未部署

|-
| '''Remark:''' || colspan="7" | 
|-
| '''Change History:''' || colspan="7" | 
|}
===TC-GPIOtrigger-5===
{| class="wikitable" style="text-align: left;"
|-
| '''ID:''' || TC-GPIOtrigger-5
| '''Module:''' || GPIOtrigger
| '''Type:''' || F
| '''Version:''' || 0.0.1
|-
| '''Reference ID:''' || 0
| '''Author:''' || Fenghelong 
| '''Created Date:''' || colspan="3" | 2013-07-06 
|-
| '''Description:''' || colspan="7" |新增GPIO调度任务,添加执行终端,在未选择的终端列表中点击终端,该终端状态变为已选择 
|-
| '''Pre-conditions:''' || colspan="7" |
# 服务器服务运行正常

|-
| '''Required Data:''' || colspan="7" | 
|-
| '''Run-Instructions:''' 
| colspan="7" | 
|-
| '''Post-conditions:''' || colspan="7" | 
|-
| '''Expectations:''' || colspan="7" |
被选择的终端变为已选择状态

|-
| '''Remark:''' || colspan="7" | 
|-
| '''Change History:''' || colspan="7" | 
|}
===TC-GPIOtrigger-6===
{| class="wikitable" style="text-align: left;"
|-
| '''ID:''' || TC-GPIOtrigger-6
| '''Module:''' || GPIOtrigger
| '''Type:''' || F
| '''Version:''' || 0.0.1
|-
| '''Reference ID:''' || 0
| '''Author:''' || Fenghelong 
| '''Created Date:''' || colspan="3" | 2013-07-06 
|-
| '''Description:''' || colspan="7" |新建GPIO触发任务,点击为选择终端列表中的组,则属于该组的所有终端状态变为已选择 
|-
| '''Pre-conditions:''' || colspan="7" |
# 服务器服务运行正常

|-
| '''Required Data:''' || colspan="7" | 
|-
| '''Run-Instructions:''' 
| colspan="7" | 
|-
| '''Post-conditions:''' || colspan="7" | 
|-
| '''Expectations:''' || colspan="7" |
分组内所有终端变为已选择状态

|-
| '''Remark:''' || colspan="7" | 
|-
| '''Change History:''' || colspan="7" | 
|}
===TC-GPIOtrigger-7===
{| class="wikitable" style="text-align: left;"
|-
| '''ID:''' || TC-GPIOtrigger-7
| '''Module:''' || GPIOtrigger
| '''Type:''' || F
| '''Version:''' || 0.0.1
|-
| '''Reference ID:''' || 0
| '''Author:''' || Fenghelong 
| '''Created Date:''' || colspan="3" | 2013-07-06 
|-
| '''Description:''' || colspan="7" |新增GPIO调度事件,GPIO输入口为23,触发方式为下降沿,当对应的终端GPIO23号口为下降沿的时候,调度任务被执行 
|-
| '''Pre-conditions:''' || colspan="7" |
# 服务器服务运行正常

|-
| '''Required Data:''' || colspan="7" | 
|-
| '''Run-Instructions:''' 
| colspan="7" | 
|-
| '''Post-conditions:''' || colspan="7" | 
|-
| '''Expectations:''' || colspan="7" |
终端满足触发条件时,调度任务将被执行

|-
| '''Remark:''' || colspan="7" | 
|-
| '''Change History:''' || colspan="7" | 
|}
===TC-GPIOtrigger-8===
{| class="wikitable" style="text-align: left;"
|-
| '''ID:''' || TC-GPIOtrigger-8
| '''Module:''' || GPIOtrigger
| '''Type:''' || F
| '''Version:''' || 0.0.1
|-
| '''Reference ID:''' || 0
| '''Author:''' || Fenghelong 
| '''Created Date:''' || colspan="3" | 2013-07-06 
|-
| '''Description:''' || colspan="7" |新增GPIO调度事件为发送短信,号码为13000000000,短信内容为"GPIO触发",当终端被触发时,终端给该号码发送短信 
|-
| '''Pre-conditions:''' || colspan="7" |
# 服务器服务运行正常

|-
| '''Required Data:''' || colspan="7" | 
|-
| '''Run-Instructions:''' 
| colspan="7" | 
|-
| '''Post-conditions:''' || colspan="7" | 
|-
| '''Expectations:''' || colspan="7" |
当终端被触发时,调度任务将被执行

|-
| '''Remark:''' || colspan="7" | 
|-
| '''Change History:''' || colspan="7" | 
|}
===TC-GPIOtrigger-9===
{| class="wikitable" style="text-align: left;"
|-
| '''ID:''' || TC-GPIOtrigger-9
| '''Module:''' || GPIOtrigger
| '''Type:''' || F
| '''Version:''' || 0.0.1
|-
| '''Reference ID:''' || 0
| '''Author:''' || Fenghelong 
| '''Created Date:''' || colspan="3" | 2013-07-06 
|-
| '''Description:''' || colspan="7" |新建GPIO触发任务,选择GPIO输入口为23,触发方式为上升沿,当对应终端的GPIO23号输入口为上升沿的时候,该调度任务被触发. 
|-
| '''Pre-conditions:''' || colspan="7" |
# 服务器服务运行正常

|-
| '''Required Data:''' || colspan="7" | 
|-
| '''Run-Instructions:''' 
| colspan="7" | 
|-
| '''Post-conditions:''' || colspan="7" | 
|-
| '''Expectations:''' || colspan="7" |
当满足触发条件时,调度任务将被执行

|-
| '''Remark:''' || colspan="7" | 
|-
| '''Change History:''' || colspan="7" | 
|}
===TC-GPIOtrigger-10===
{| class="wikitable" style="text-align: left;"
|-
| '''ID:''' || TC-GPIOtrigger-10
| '''Module:''' || GPIOtrigger
| '''Type:''' || F
| '''Version:''' || 0.0.1
|-
| '''Reference ID:''' || 0
| '''Author:''' || Fenghelong 
| '''Created Date:''' || colspan="3" | 2013-07-06 
|-
| '''Description:''' || colspan="7" |新增GPIO调度任务,GPIO输入口为12,出发条件为上升沿,当对应终端的GPIO12号输入口为上升沿时,该调度事件被触发 
|-
| '''Pre-conditions:''' || colspan="7" |
# 服务器服务运行正常

|-
| '''Required Data:''' || colspan="7" | 
|-
| '''Run-Instructions:''' 
| colspan="7" | 
|-
| '''Post-conditions:''' || colspan="7" | 
|-
| '''Expectations:''' || colspan="7" |
当终端满足触发条件时,调度任务将被执行

|-
| '''Remark:''' || colspan="7" | 
|-
| '''Change History:''' || colspan="7" | 
|}
===TC-GPIOtrigger-11===
{| class="wikitable" style="text-align: left;"
|-
| '''ID:''' || TC-GPIOtrigger-11
| '''Module:''' || GPIOtrigger
| '''Type:''' || F
| '''Version:''' || 0.0.1
|-
| '''Reference ID:''' || 0
| '''Author:''' || Fenghelong 
| '''Created Date:''' || colspan="3" | 2013-07-06 
|-
| '''Description:''' || colspan="7" |新增GPIO调度事件,GPIO输入口为15,触发方式为下降沿,当对应终端GPIO15号输入口为下降沿时,该调度事件被执行 
|-
| '''Pre-conditions:''' || colspan="7" |
# 服务器服务运行正常

|-
| '''Required Data:''' || colspan="7" | 
|-
| '''Run-Instructions:''' 
| colspan="7" | 
|-
| '''Post-conditions:''' || colspan="7" | 
|-
| '''Expectations:''' || colspan="7" |
当终端满足触发条件后,调度任务将被执行

|-
| '''Remark:''' || colspan="7" | 
|-
| '''Change History:''' || colspan="7" | 
|}
===TC-GPIOtrigger-12===
{| class="wikitable" style="text-align: left;"
|-
| '''ID:''' || TC-GPIOtrigger-12
| '''Module:''' || GPIOtrigger
| '''Type:''' || F
| '''Version:''' || 0.0.1
|-
| '''Reference ID:''' || 0
| '''Author:''' || Fenghelong 
| '''Created Date:''' || colspan="3" | 2013-07-06 
|-
| '''Description:''' || colspan="7" |新增GPIO调度事件为发送邮件,邮件地址为admin@g77k.com,当此终端被触发时,终端将向该邮箱发送邮件 
|-
| '''Pre-conditions:''' || colspan="7" |
# 服务器服务运行正常

|-
| '''Required Data:''' || colspan="7" | 
|-
| '''Run-Instructions:''' 
| colspan="7" | 
|-
| '''Post-conditions:''' || colspan="7" | 
|-
| '''Expectations:''' || colspan="7" |
当终端满足触发条件时,调度任务将被执行

|-
| '''Remark:''' || colspan="7" | 
|-
| '''Change History:''' || colspan="7" | 
|}
===TC-GPIOtrigger-13===
{| class="wikitable" style="text-align: left;"
|-
| '''ID:''' || TC-GPIOtrigger-13
| '''Module:''' || GPIOtrigger
| '''Type:''' || F
| '''Version:''' || 0.0.1
|-
| '''Reference ID:''' || 0
| '''Author:''' || Fenghelong 
| '''Created Date:''' || colspan="3" | 2013-07-06 
|-
| '''Description:''' || colspan="7" |新增GPIO调度为GPIO6号口高电平输出,当终端被触发时,此终端23号口输出高电平 
|-
| '''Pre-conditions:''' || colspan="7" |
# 服务器服务运行正常

|-
| '''Required Data:''' || colspan="7" | 
|-
| '''Run-Instructions:''' 
| colspan="7" | 
|-
| '''Post-conditions:''' || colspan="7" | 
|-
| '''Expectations:''' || colspan="7" |
终端23号口输出高电平

|-
| '''Remark:''' || colspan="7" | 
|-
| '''Change History:''' || colspan="7" | 
|}
===TC-GPIOtrigger-14===
{| class="wikitable" style="text-align: left;"
|-
| '''ID:''' || TC-GPIOtrigger-14
| '''Module:''' || GPIOtrigger
| '''Type:''' || F
| '''Version:''' || 0.0.1
|-
| '''Reference ID:''' || 0
| '''Author:''' || Fenghelong 
| '''Created Date:''' || colspan="3" | 2013-07-06 
|-
| '''Description:''' || colspan="7" |新增GPIO调度事件为GPIO6号口低电平输出,当终端被触发时,6号口输出低电平 
|-
| '''Pre-conditions:''' || colspan="7" |
# 服务器服务运行正常

|-
| '''Required Data:''' || colspan="7" | 
|-
| '''Run-Instructions:''' 
| colspan="7" | 
|-
| '''Post-conditions:''' || colspan="7" | 
|-
| '''Expectations:''' || colspan="7" |
6号口将输出低电平

|-
| '''Remark:''' || colspan="7" | 
|-
| '''Change History:''' || colspan="7" | 
|}
===TC-GPIOtrigger-15===
{| class="wikitable" style="text-align: left;"
|-
| '''ID:''' || TC-GPIOtrigger-15
| '''Module:''' || GPIOtrigger
| '''Type:''' || F
| '''Version:''' || 0.0.1
|-
| '''Reference ID:''' || 0
| '''Author:''' || Fenghelong 
| '''Created Date:''' || colspan="3" | 2013-07-06 
|-
| '''Description:''' || colspan="7" |新增GPIO输出调度事件,配置输出端口为22号口,规则频率,持续5秒,3次/秒,当终端被触发时,终端的GPIO22号口输出3次/秒,的规则频率,持续时间为5秒 
|-
| '''Pre-conditions:''' || colspan="7" |
# 服务器服务运行正常

|-
| '''Required Data:''' || colspan="7" | 
|-
| '''Run-Instructions:''' 
| colspan="7" | 
|-
| '''Post-conditions:''' || colspan="7" | 
|-
| '''Expectations:''' || colspan="7" |
当终端满足触发条件时,调度任务将被执行

|-
| '''Remark:''' || colspan="7" | 
|-
| '''Change History:''' || colspan="7" | 
|}
===TC-GPIOtrigger-16===
{| class="wikitable" style="text-align: left;"
|-
| '''ID:''' || TC-GPIOtrigger-16
| '''Module:''' || GPIOtrigger
| '''Type:''' || F
| '''Version:''' || 0.0.1
|-
| '''Reference ID:''' || 0
| '''Author:''' || Fenghelong 
| '''Created Date:''' || colspan="3" | 2013-07-06 
|-
| '''Description:''' || colspan="7" |新增GPIO输出事件,输出端口为22号口,配置输出为不规则频率,持续4秒,频率为8次/秒,小周期内频率为3次/小周期,高输出为2秒,低输出时间为2秒.当终端被触发时,此终端能够完成上述输出效果 
|-
| '''Pre-conditions:''' || colspan="7" |
# 服务器服务运行正常

|-
| '''Required Data:''' || colspan="7" | 
|-
| '''Run-Instructions:''' 
| colspan="7" | 
|-
| '''Post-conditions:''' || colspan="7" | 
|-
| '''Expectations:''' || colspan="7" |
当终端满足触发条件时,调度任务将被执行

|-
| '''Remark:''' || colspan="7" | 
|-
| '''Change History:''' || colspan="7" | 
|}
===TC-GPIOtrigger-17===
{| class="wikitable" style="text-align: left;"
|-
| '''ID:''' || TC-GPIOtrigger-17
| '''Module:''' || GPIOtrigger
| '''Type:''' || F
| '''Version:''' || 0.0.1
|-
| '''Reference ID:''' || 0
| '''Author:''' || Fenghelong 
| '''Created Date:''' || colspan="3" | 2013-07-06 
|-
| '''Description:''' || colspan="7" |新增GPIO调度事件为临时频道广播,设置收听频道为"流行音乐",添加成功后,对应终端被出发时,开始收听"流行音乐广播" 
|-
| '''Pre-conditions:''' || colspan="7" |
# 服务器服务运行正常

|-
| '''Required Data:''' || colspan="7" | 
|-
| '''Run-Instructions:''' 
| colspan="7" | 
|-
| '''Post-conditions:''' || colspan="7" | 
|-
| '''Expectations:''' || colspan="7" |
当终端满足触发条件时,调度任务将被执行

|-
| '''Remark:''' || colspan="7" | 
|-
| '''Change History:''' || colspan="7" | 
|}
===TC-GPIOtrigger-18===
{| class="wikitable" style="text-align: left;"
|-
| '''ID:''' || TC-GPIOtrigger-18
| '''Module:''' || GPIOtrigger
| '''Type:''' || F
| '''Version:''' || 0.0.1
|-
| '''Reference ID:''' || 0
| '''Author:''' || Fenghelong 
| '''Created Date:''' || colspan="3" | 2013-07-06 
|-
| '''Description:''' || colspan="7" |新增GPIO触发事件为发起广播/收听广播,配置收听广播的号码为空,提示收听广播的终端号码不能为空 
|-
| '''Pre-conditions:''' || colspan="7" |
# 服务器服务运行正常

|-
| '''Required Data:''' || colspan="7" | 
|-
| '''Run-Instructions:''' 
| colspan="7" | 
|-
| '''Post-conditions:''' || colspan="7" | 
|-
| '''Expectations:''' || colspan="7" |
当终端满足触发条件时,调度任务将被执行

|-
| '''Remark:''' || colspan="7" | 
|-
| '''Change History:''' || colspan="7" | 
|}
===TC-GPIOtrigger-19===
{| class="wikitable" style="text-align: left;"
|-
| '''ID:''' || TC-GPIOtrigger-19
| '''Module:''' || GPIOtrigger
| '''Type:''' || F
| '''Version:''' || 0.0.1
|-
| '''Reference ID:''' || 0
| '''Author:''' || Fenghelong 
| '''Created Date:''' || colspan="3" | 2013-07-06 
|-
| '''Description:''' || colspan="7" |新增GPIO调度事件,配置收听终端为1989,2010,当终端被出发时,这两个终端开始收听广播 
|-
| '''Pre-conditions:''' || colspan="7" |
# 服务器服务运行正常

|-
| '''Required Data:''' || colspan="7" | 
|-
| '''Run-Instructions:''' 
| colspan="7" | 
|-
| '''Post-conditions:''' || colspan="7" | 
|-
| '''Expectations:''' || colspan="7" |
当终端满足触发条件时,调度任务将被执行

|-
| '''Remark:''' || colspan="7" | 
|-
| '''Change History:''' || colspan="7" | 
|}
===TC-GPIOtrigger-20===
{| class="wikitable" style="text-align: left;"
|-
| '''ID:''' || TC-GPIOtrigger-20
| '''Module:''' || GPIOtrigger
| '''Type:''' || F
| '''Version:''' || 0.0.1
|-
| '''Reference ID:''' || 0
| '''Author:''' || Fenghelong 
| '''Created Date:''' || colspan="3" | 2013-07-06 
|-
| '''Description:''' || colspan="7" |新增GPIO调度任务,为发起对讲/接受对讲/参与对讲,配置参与号码为空,保存,提示参与号码不能为空 
|-
| '''Pre-conditions:''' || colspan="7" |
# 服务器服务运行正常

|-
| '''Required Data:''' || colspan="7" | 
|-
| '''Run-Instructions:''' 
| colspan="7" | 
|-
| '''Post-conditions:''' || colspan="7" | 
|-
| '''Expectations:''' || colspan="7" |
提示号码不能为空

|-
| '''Remark:''' || colspan="7" | 
|-
| '''Change History:''' || colspan="7" | 
|}
===TC-GPIOtrigger-21===
{| class="wikitable" style="text-align: left;"
|-
| '''ID:''' || TC-GPIOtrigger-21
| '''Module:''' || GPIOtrigger
| '''Type:''' || F
| '''Version:''' || 0.0.1
|-
| '''Reference ID:''' || 0
| '''Author:''' || Fenghelong 
| '''Created Date:''' || colspan="3" | 2013-07-06 
|-
| '''Description:''' || colspan="7" |查看GPIO调度时间的详情,在新页面中显示调度的描述,创建时间,最后修改时间,执行任务的列表,应用终端等信息 
|-
| '''Pre-conditions:''' || colspan="7" |
# 服务器服务运行正常

|-
| '''Required Data:''' || colspan="7" | 
|-
| '''Run-Instructions:''' 
| colspan="7" | 
|-
| '''Post-conditions:''' || colspan="7" | 
|-
| '''Expectations:''' || colspan="7" |
察看GPIO调度任务详情成功

|-
| '''Remark:''' || colspan="7" | 
|-
| '''Change History:''' || colspan="7" | 
|}
===TC-GPIOtrigger-22===
{| class="wikitable" style="text-align: left;"
|-
| '''ID:''' || TC-GPIOtrigger-22
| '''Module:''' || GPIOtrigger
| '''Type:''' || F
| '''Version:''' || 0.0.1
|-
| '''Reference ID:''' || 0
| '''Author:''' || Fenghelong 
| '''Created Date:''' || colspan="3" | 2013-07-06 
|-
| '''Description:''' || colspan="7" |删除已经配置好的GPIO事件,则此GPIO调度事件中的所有触发任务都不会被执行 
|-
| '''Pre-conditions:''' || colspan="7" |
# 服务器服务运行正常

|-
| '''Required Data:''' || colspan="7" | 
|-
| '''Run-Instructions:''' 
| colspan="7" | 
|-
| '''Post-conditions:''' || colspan="7" | 
|-
| '''Expectations:''' || colspan="7" |
终端将不会执行已经被删除的调度任务

|-
| '''Remark:''' || colspan="7" | 
|-
| '''Change History:''' || colspan="7" | 
|}
===TC-GPIOtrigger-23===
{| class="wikitable" style="text-align: left;"
|-
| '''ID:''' || TC-GPIOtrigger-23
| '''Module:''' || GPIOtrigger
| '''Type:''' || F
| '''Version:''' || 0.0.1
|-
| '''Reference ID:''' || 0
| '''Author:''' || Fenghelong 
| '''Created Date:''' || colspan="3" | 2013-11-8 
|-
| '''Description:''' || colspan="7" |新增GPIO调度事件为发送邮件,GPIO输入为短路输入1，邮件地址为527159444@qq.com,当此终端被触发时,终端将向该邮箱发送邮件 
|-
| '''Pre-conditions:''' || colspan="7" |
# 服务器服务运行正常
# 终端运行正常
|-
| '''Required Data:''' || colspan="7" | 
|-
| '''Run-Instructions:''' 
| colspan="7" | 
|-
| '''Post-conditions:''' || colspan="7" | 
|-
| '''Expectations:''' || colspan="7" |
当终端满足触发条件时,调度任务将被执行，登陆邮箱可以收到邮件！

|-
| '''Remark:''' || colspan="7" | 
|-
| '''Change History:''' || colspan="7" | 
|}
===TC-GPIOtrigger-24===
{| class="wikitable" style="text-align: left;"
|-
| '''ID:''' || TC-GPIOtrigger-24
| '''Module:''' || GPIOtrigger
| '''Type:''' || F
| '''Version:''' || 0.0.1
|-
| '''Reference ID:''' || 0
| '''Author:''' || Fenghelong 
| '''Created Date:''' || colspan="3" | 2013-11-8 
|-
| '''Description:''' || colspan="7" |新增GPIO调度事件为发送邮件,GPIO输入为短路输入2，邮件地址为527159444@qq.com,当此终端被触发时,终端将向该邮箱发送邮件 
|-
| '''Pre-conditions:''' || colspan="7" |
# 服务器服务运行正常
# 终端运行正常
|-
| '''Required Data:''' || colspan="7" | 
|-
| '''Run-Instructions:''' 
| colspan="7" | 
|-
| '''Post-conditions:''' || colspan="7" | 
|-
| '''Expectations:''' || colspan="7" |
当终端满足触发条件时,调度任务将被执行，登陆邮箱可以收到邮件！

|-
| '''Remark:''' || colspan="7" | 
|-
| '''Change History:''' || colspan="7" | 
|}
===TC-GPIOtrigger-25===
{| class="wikitable" style="text-align: left;"
|-
| '''ID:''' || TC-GPIOtrigger-25
| '''Module:''' || GPIOtrigger
| '''Type:''' || F
| '''Version:''' || 0.0.1
|-
| '''Reference ID:''' || 0
| '''Author:''' || Fenghelong 
| '''Created Date:''' || colspan="3" | 2013-11-8 
|-
| '''Description:''' || colspan="7" |新增GPIO调度事件为发送邮件,GPIO输入为短路输入1，邮件地址为527159444@qq.com,luozzz666@163.com,luozzz666@gmail.当此终端被触发时,终端将向该邮箱发送邮件 
|-
| '''Pre-conditions:''' || colspan="7" |
# 服务器服务运行正常
# 终端运行正常
|-
| '''Required Data:''' || colspan="7" | 
|-
| '''Run-Instructions:''' 
| colspan="7" | 
|-
| '''Post-conditions:''' || colspan="7" | 
|-
| '''Expectations:''' || colspan="7" |
当终端满足触发条件时,调度任务将被执行，登陆邮箱可以收到邮件！

|-
| '''Remark:''' || colspan="7" | 
|-
| '''Change History:''' || colspan="7" | 
|}
===TC-GPIOtrigger-26===
{| class="wikitable" style="text-align: left;"
|-
| '''ID:''' || TC-GPIOtrigger-26
| '''Module:''' || GPIOtrigger
| '''Type:''' || F
| '''Version:''' || 0.0.1
|-
| '''Reference ID:''' || 0
| '''Author:''' || Fenghelong 
| '''Created Date:''' || colspan="3" | 2013-11-8 
|-
| '''Description:''' || colspan="7" |新增GPIO调度事件为发送邮件,GPIO输入为短路输入2，邮件地址为527159444@qq.com,luozzz666@163.com,luozzz666@gmail.当此终端被触发时,终端将向该邮箱发送邮件 
|-
| '''Pre-conditions:''' || colspan="7" |
# 服务器服务运行正常
# 终端运行正常
|-
| '''Required Data:''' || colspan="7" | 
|-
| '''Run-Instructions:''' 
| colspan="7" | 
|-
| '''Post-conditions:''' || colspan="7" | 
|-
| '''Expectations:''' || colspan="7" |
当终端满足触发条件时,调度任务将被执行，登陆邮箱可以收到邮件！

|-
| '''Remark:''' || colspan="7" | 
|-
| '''Change History:''' || colspan="7" | 
|}